FIRE SHUTTERS & CURTAINS

RELIABLE FIRE SHUTTERS AND CURTAINS 

THE BEST PROTECTION – FIRE SHUTTERS BUILT TO WITHSTAND THE HEAT

Fire protection for your commercial, industrial and retail premises can be even more important than you may have previously envisaged. If you have an opening that is required to have the same fire integrity of the surrounding building structure, then a correctly rated fire shutter can provide this while still allowing you to use the opening as designed. Aardee Security Shutters Ltd can provide you with the expert advice needed to ensure you install fire shutters or fire curtains that meet the rules and regulations that you may need to take into account.
THE BEST PROTECTION – FIRE SHUTTERS BUILT TO WITHSTAND THE HEAT

PAINT FINISHES TO MATCH

  • FC1 Commercial fire shutters manufactured by RCS doors can be supplied with 50mm flat lath or 76mm concave. Providing both a fire and security barrier, it is limited however to openings of two to four per day. Designed for use in schools, hospitals, restaurants, and kitchens, its unobtrusive appearance is ideal for these locations. It is provided with a basic FDI panel and optional AVFDI unit. Battery backup is supplied as standard. This unit must be connected to your internal fire alarm system.
  • FC2 Industrial fire shutters are supplied with 76mm concave lath and use a range of single and three phase inline motor units dependent on the size of the shutter. It has a variety of control options including solenoid activation and a fusible link.
  • FCi insulated fire shutters provide both a high level of fire integrity and security with up to four hours fire rating. The internal Rockwool insulation provides a thermal and noise reduction benefit as well. Single and three phase inline motors are available as well as a wide range of controls and warning devices.
The FC1, FC2, and FCi are available in either a galvanised steel finish as standard, or an optional range of RAL and BS powder coat paint finishes to match your existing or new build finish.

ESTABLISHED SINCE 1941

COMMERCIAL AND INDUSTRIAL

24/7 CALL OUTS

SMOKE AND FIRE CURTAINS

Building owners and managers have various ways to protect customers and employees from the dangers of smoke and fire. One of the methods is by using fire curtains which are designed to limit the spread of smoke and fire, creating escape routes for personnel in times of danger.

LONG-TIME PROVIDER OF FIRE CURTAINS ACROSS GLASGOW AND THE WHOLE OF SCOTLAND

At Aardee Security Shutters Ltd we have a range available that includes:
  • The FC1 unit from BLE – A cost-effective fire curtain for smaller projects which can be used for openings up to 3M x 3M. Rated at 1000C with up to 60 minutes integrity and 60 minutes radiation to BS EN 1634.1. This unit from BLE has Exova Warrington - Certificate of Approval.
  • The FC2 from BLE – The highest performing curtain in the BLE range. Its fabric is made of a woven glass fibre with stainless steel reinforcement to ensure that it can withstand the most severe fires. Rated at 1000C, up to 240 minutes integrity and 60 minutes radiation to BS EN 1634-1 and BS476 Part 22, this unit is approved for unlimited widths and drops of up to 8M. It has the Exova Warrington Certifire Certificate of Approval.
  • The FC4 from BLE – Provides both integrity and radiant heat protection in the one curtain. Rated at 1000C for up to 120 minutes for integrity and radiation to BS EN 1634-1, this unit is approved for widths up to 7M and drops of up to 4M. The glass fibre is laminated on both sides with heat reflective aluminium foil.
Our survey team will be pleased to visit your site to advise you on the best fire curtain system to protect your retail, commercial or industrial buildings. Get in touch with us today.
FOR MORE INFORMATION ON FIRE SHUTTERS AND CURTAINS OR TO ORGANISE AN ON-SITE SURVEY. CONTACT US ON 0141 810 3444
Share by: